Gastite^® is a corrugated stainless steel tubing complying with ANSI LC 1 "Fuel Gas Piping Systems Using CSST" and listed with CSA^®, ICC and IAPMO. Manufacturing materials are: ASTM A240 type 300 corrugated stainless steel tubing with a minimum wall thickness of .010", jacketing of UV resistant polyethylene meeting the requirements of ASTM E84 for flame spread and smoke density. All mechanical tube fittings are SAE CA360 brass incorporating double wall flare sealing and Jacket Lock^® jacket capturing for steel tubing protection.

•	Quick & Easy Installation
•	Required Tools: Tubing Cutter, Utility Knife, Wrenches
•	Fewer Fittings, Less Waste
•	Technical Support
•	Polyethylene Jacket
•	Pre-Marked by the Foot
•	Lightweight & Flexible
•	100% Factory Pressure Tested

•	CSA: ANSI LC 1 "Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing"
•	IAPMO: International Association of Plumbing & Mechanical Officials - File No. C-3250
•	ICC: International Code Council - Evaluation Report No. ESR-1031

Max. Approved Operating Pressure	5 psi
Recommended Test Pressure	50 psi
Tubing Minimum Burst Pressure	1500 psi
Operating Temperature Range	-100°F to 400°F
Tubing Melting Point	2400°F
Jacket Melting Point	350°F
Tubing Material	ASTM A240 Type 304 SS
Jacket Material	UV Resistant Polyethylene
ASTM E84 Rating (PE Jacket)	Flame 25, Smoke 20